Home » Head Protection » Safety Helmet | Hard Hat » Non-Vented Protective Safety Helmet | MUSSE Head Proteciton
MU-27101
High quality non-vented protective safety helmet is made of HDPE (High-density polyethylene), light weight, 6-point PE helmet suspension provides better impact resistance, made in Taiwan.
In the following shocks, the suspension design of the 6-point helmet, plus four pointed cones at the junction of each hat ring and the cap shell, will absorb part of the impact when an impact occurs, providing users with More impact protection. It can protect the user's head so that the impact force transmitted to the head does not exceed 5 kN. (European industrial safety helmet testing standards, a standard 5 kg striker falls from a height of 1000 mm and hits the helmet.)
Hard hat should provide adequate protection for the wearer's head and prevent any injury caused by the puncture striker. (European industrial safety helmet testing standards, a standard 3 kg puncture striker falls from a height of 1000 mm and hits the Hard hat.)
No exposed metal parts
Passed American and European standards, and obtained EN397, ANSI Z89.1 certification, which helps to wear the helmet more firmly and avoid harm to the wearer.
In order to prevent the chin strap from loosening prematurely or strangling the user's head and causing injury, the chin strap must not fall off or break before 150N, it will loosen or break between 150N and 250N.
N/A
Made in Taiwan
HDPE (high-density polyethylene)
Without vents
Blue, Green, Orange, Red, White, Yellow
6-Point PE suspension, Pin-lock type
Taiwan
Optional, MU-28101 Chin strap
MU-27101 Safety Helmet
Safety Helmet(MU-27101) with Standard chin strap (MU-28101)
MU-28101 Chin strap
El casco de seguridad protector sin ventilación de alta calidad (MU-27101) está hecho de HDPE (polietileno de alta densidad), la suspensión del casco de PE de 6 puntos y peso ligero proporciona una mejor resistencia al impacto, fabricado en Taiwán.
En los siguientes choques, el diseño de suspensión del casco de 6 puntos, más cuatro conos puntiagudos en la unión de cada anillo de sombrero y la cubierta de la gorra, absorberán parte del impacto cuando ocurre un impacto, proporcionando a los usuarios más protección contra impactos. Puede proteger la cabeza del usuario para que la fuerza de impacto transmitida a la cabeza no supere los 5 kN. (Según los estándares europeos de prueba de cascos de seguridad industrial, un percutor estándar de 5 kg cae desde una altura de 1000 mm y golpea el casco).
El casco debe proporcionar protección adecuada para la cabeza del usuario y evitar cualquier lesión causada por el percutor. (Según los estándares europeos de prueba de cascos de seguridad industrial, un percutor estándar de 3 kg cae desde una altura de 1000 mm y golpea el casco).
Sin partes metálicas expuestas
Pasó los estándares estadounidenses y europeos, y obtuvo la certificación EN397, ANSI Z89.1, que ayuda a usar el casco con más firmeza y evitar daños al usuario.
Para evitar que la correa de la barbilla se afloje prematuramente o estrangule la cabeza del usuario y cause lesiones, la correa de la barbilla no debe caerse ni romperse antes de 150N, se aflojará o romperá entre 150N y 250N.
N / A
Hecho en Taiwán
HDPE (polietileno de alta densidad)
Sin ventilaciones
Azul, verde, naranja, rojo, blanco, amarillo
Suspensión de PE de 6 puntos, tipo pin-lock
Taiwán
opcional, correa de barbilla MU-28101
Casco de seguridad MU-27101
Casco de seguridad (MU-27101) con correa de barbilla estándar (MU-28101)
MU-28101 Correa de barbilla
Contact
TEL: 886-2-2901-2666
FAX: 886-2-2901-6056
Email: info@musse.com.tw
Address
4F., No.22, Ln. 899, Zhongzheng Rd.,Xinzhuang Dist., New Taipei City 242, Taiwan (R.O.C.)