Aluminized Trousers | EN ISO 11612 Foundry Legwear

Item

Description

The MU-41103 covers the legs, which take the splash that runs down rather than the splash that flies. That distinction matters when specifying: a torso garment is protecting against what comes at the worker, while legwear is largely protecting against what falls and what reflects up off the floor.

At a 34 in waist and 39 in length the trousers are cut to go over normal workwear. They are worn with the gaiters, which close the gap at the hem where a boot top would otherwise be exposed. That gap is the usual weak point in a leg assembly and is the reason gaiters are ordered alongside rather than as an afterthought.

Key Features

Pairs With the Gaiters The hem-to-boot gap is the usual weak point in a leg assembly, which is why the gaiters are ordered alongside rather than later.
Aluminized Reflective Face The aluminized side reflects radiant heat rather than absorbing it, which is what keeps the fabric behind it workable.
For Steel Mills and Foundries Supplied for steel mills, casting shops, heat treating operations and foundries, against radiant heat and molten metal splash.
Worn Over Normal Workwear Aluminized items are put on for the hot task and taken off afterwards. Sizing is the finished garment, not the body.
OEM and Wholesale Bulk supply from Taiwan. Sizes and quantities are confirmed at quotation.

Specifications

Specification	Detail
Model	MU-41103
Material	Woven fabric of a modified acrylic fibre over a fibreglass core yarn, aluminized on one side
Standards	EN ISO 11612
Size	Waist circumference 34 in, trouser length 39 in
Origin	Taiwan

Frequently Asked Questions

Q: Why are gaiters needed if the trousers are 39 in long?

A: Because the join is the weak point, not the length. A trouser hem sits over the boot top and molten splash can run into that overlap. The gaiters close it. Sites that order trousers without gaiters usually come back for them after the first incident.

Q: Do these go over normal work trousers?

A: Yes. The 34 in waist is the finished garment measurement and allows for clothing underneath. Aluminized legwear is put on for the hot task rather than worn through a shift.

PRODUCTS

Aluminized Trousers | EN ISO 11612 Foundry Legwear | MUSSE
MU-41103

Item

Description

Frequently Asked Questions

PRODUCTS

Aluminized Trousers | EN ISO 11612 Foundry Legwear | MUSSE MU-41103

Item

Description

Frequently Asked Questions

Aluminized Trousers | EN ISO 11612 Foundry Legwear | MUSSE
MU-41103