PRODUCTS

Emergency Eyewash & Safety Showers

When an industrial worker or laboratory technician is exposed to hazardous chemicals, corrosives, or fine particulates, the first 10 to 15 seconds after exposure are absolutely critical. Emergency eyewash stations and safety drench showers are designed to provide immediate, on-the-spot decontamination. By rapidly flushing the eyes and body with large volumes of tepid water, these systems dilute and wash away dangerous substances, preventing permanent tissue damage and ensuring facility compliance with strict occupational safety regulations.

We supply a comprehensive range of heavy-duty emergency washing equipment engineered to meet the stringent requirements of ANSI/ISEA Z358.1 and EN 15154 standards:

    >Combination Eyewash & Shower Units: The ultimate all-in-one decontamination solution for high-risk chemical environments. These freestanding units feature a high-volume overhead drench shower and a dual-spray eyewash bowl, designed to operate simultaneously to flush the entire body and eyes at once. >Plumbed Eyewash Stations: Wall-mounted or pedestal-mounted eyewash bowls connected directly to a facility’s water supply. They deliver a soft, continuous aerated flow of water specifically calibrated to gently flush hazardous contaminants from the delicate tissues of the eyes without causing further mechanical injury. >Portable & Gravity-Fed Eyewashes: For remote construction sites, agricultural fields, or temporary work zones without access to plumbed water, our portable gravity-fed eyewash tanks hold enough treated water to provide the mandatory 15 minutes of continuous flushing. >Durable, Corrosion-Resistant Materials: Industrial environments can be harsh. Our equipment is available in high-visibility yellow ABS plastic for superior chemical resistance, or heavy-gauge 304/316 stainless steel for maximum durability in extreme outdoor, marine, or highly corrosive settings.

Your Reliable Facility Safety Partner in Taiwan
As an experienced PPE and industrial safety equipment exporter in Taiwan, we support B2B distributors, manufacturing plants, and laboratories with certified emergency response equipment. We offer OEM/ODM services for customized safety signage, specialized coatings, and regional compliance modifications. Utilizing our mixed-container consolidation service, you can efficiently import bulky eyewash stations alongside fire protection gear, spill kits, and safety helmets in a single, cost-optimized shipment from Taiwan.

Frequently Asked Questions

Q: What are the ANSI Z358.1 requirements for an emergency eyewash station?
According to the ANSI/ISEA Z358.1 standard, an eyewash station must deliver a continuous flow of tepid water at a minimum rate of 0.4 gallons (1.5 liters) per minute for a full 15 minutes. The unit must be capable of being activated in 1 second or less with a hands-free stay-open valve. Additionally, it must be installed so the fluid flow pattern is between 33 and 53 inches from the floor.
Q: How much water flow is required for an emergency safety drench shower?
To comply with ANSI Z358.1, an emergency safety shower must be capable of delivering a much higher volume of water than an eyewash. It must provide a minimum flow rate of 20 gallons (75.7 liters) per minute for at least 15 minutes. The showerhead must be positioned between 82 and 96 inches from the floor, with the spray pattern designed to effectively drench the entire body.
Q: Where should emergency eyewash and safety showers be located?
Safety regulations dictate that emergency washing equipment must be located on the same level as the hazard and accessible within a 10-second walk (approximately 55 feet or 16.8 meters). The path of travel to the equipment must be kept completely free of obstructions and doors, and the area surrounding the shower or eyewash must be well-lit with highly visible safety signage.
Q: What does tepid water mean for emergency showers?
ANSI Z358.1 requires that the flushing fluid delivered by the equipment be tepid, which is defined as between 60°F and 100°F (16°C to 38°C). Water that is too cold can cause thermal shock or discourage the user from flushing for the full required 15 minutes. Water that is too hot can accelerate chemical reactions and cause further scalding to the skin or eyes. Thermostatic mixing valves (TMVs) are often required to regulate this temperature.

  • Contact

    TEL: 886-2-2901-2666

    FAX: 886-2-2901-6056

    Email: info@musse.com.tw

  • Address

    4 F., No. 22, Ln. 899, Zhongzheng Rd., Xinzhuang Dist., New Taipei City 242052, Taiwan (R.O.C.)

GO TOP